Category Archives: Fire & Rescue NSW

Fire & Rescue NSW. Formerly NSW Fire Brigades

Fire & Rescue NSW Fire Station

Fire & Rescue NSW. Station 497 – Weston.

Fire & Rescue NSW. Station 497 – Weston.

Weston Fire Station is located in the Hunter Valley region north of Sydney, known for its wineries.
This fire station is staffed by Retained crew.

Photo Gallery – Weston Fire Station


Fire & Rescue NSW Fire Station

Fire & Rescue NSW. Station 3 – The Rocks.

Fire & Rescue NSW. Station 3 – The Rocks.

This station is located in the historic district of The Rocks in Sydney, on high ground above the hungry mile (the city’s former shipping hub) and very close to the southern end of the Sydney Harbour Bridge

The Fire Station holds one Operational Appliance, Pump 3 which is currently a Scania Pumper built by SEM though it is a 2-bay station.
The Station runs a single crew of 1 Station Officer and 3 Firefighters on standard 10/14 roster.

Photo Gallery – The Rocks Fire Station


Fire & Rescue NSW Fire Station

Fire & Rescue NSW. Station 1 – City of Sydney

Fire & Rescue NSW. Station 1 – City of Sydney.
CoS Facebook Page

This station is located in the southern part of the Sydney CBD, close to landmarks such as Hyde Park and Town Hall. Also at this location is the Headquarters of the service across a number of buildings which include senior operational staff as well as corporate ‘office’ staff. The Fire Station itself is a combination of heritage building with later additions.

Still part of the current Fire Station building, the first section was completed in 1888 to replace the former headquarters operating from the old Insurance Brigade Headquarters in Bathurst Street. As were the times, the station operated with horse-drawn equipment so included stables to the rear of the building leading into the engine room. Additional space in an adjacent building was obtained from 1902, with the original building being extended in 1907. These extensions were initially used for administrative purposes. In 1928 further conversions were completed to house the motorised fleet.
While the need was identified in the 1930s, a major project for a larger fire station was finally completed in 2003. This included new construction and restoration of the earlier building sections.
This information is sourced from FRNSW where more detail can be found: History of City of Sydney Fire Station

Operational vehicles at City of Sydney include:
Flyer 1 (First call pump)
Runner 1 (Second call pump) – currently ME257 -Scania Pumper
Rescue Pump 1 – currently ME258 -Scania Rescue Pumper
Rescue 1
Ladder Platform 1 – currently ME101 – Scania – Bronto 44m Ladder Platform
LSV
DC City
There is also additional equipment including a high-rise or portable pump stored in a trailer.

There are actually a number of stations within the City of Sydney local government area, including 3 The Rocks, 4 Darlinghurst, 5 Newtown, 10 Redfern, 13 Alexandria, 18 Glebe and 38 Pyrmont

City of Sydney (No.1) Fire StationJuly 2006

Photo Gallery – City of Sydney Fire Station

Posts on the appliances that have run from City of Sydney:


Alexander Perrie Appliances Bronto Ladders/Platforms Fire & Rescue NSW New South Wales Scania

Fire & Rescue NSW – ME101 – Scania – Bronto 44m Ladder Platform

Service – NSW Fire & Rescue
Appliance type – Ladder Platform
Fleet number – ME101
Cab Chassis – Scania P420
Body Builder – Alexander Perrie / Bronto Skylift
Registration – BG14HR

Delivered in 2010 to 1-City of Sydney station. This replaced ME816, which was given a refresh before moving to 27 Parramatta.
Bronto supplied the F44RLX ERX hydraulic ladder platform on Scania Cab Chassis with Alexander Perrie in Sydney completing the fitout prior to delivery to Fire & Rescue NSW

Full Gallery


Appliances Fire & Rescue NSW New South Wales Pumper Scania SEM (Skilled)

Fire & Rescue NSW – ME258 -Scania Rescue Pumper – 1 City of Sydney

Service  -NSW Fire & Rescue
Appliance Type – Rescue Pumper
Fleet number – ME 258
Cab Chassis – Scania
Body Builder – SEM
Registration – BG26RB

This Scania was 1 of 3 new Scania Pumpers for City of Sydney Fire Station. This Pumper was brought in to enable the change of the Heavy Rescue appliance to a 2-operator crew, down from 5 operators on the Varley Commander. It is an incremental appliance, while maintaining total crew at City of Sydney with a new Isuzu Heavy Rescue plus this Rescue Pumper replacing the Commander Heavy Rescue

FRNSW Rescue Pump 1A new appliance - both the truck and the assignment, for City of Sydney Station. This will be a 3rd call pump and 2nd call Rescue appliance.


Appliances Fire & Rescue NSW Isuzu Mills Tui New South Wales Specialist

Fire & Rescue NSW – ME201 -CO2 Tender (2013)

Service  -NSW Fire & Rescue
Appliance Type – CO2 Tender (Specialised Appliance)
Fleet number – ME 201
Cab Chassis – Isuzu
Body Builder – Mills Tui
Registration – BR76ZA

This Isuzu replaced a previous Isuzu model at Pyrmont Fire Station in 2013.

The CO2 tender is used to combat fires where water or other extinguishing agents are unsuitable. Key examples of these are electrical fires and shipboard fires. In these situations, CO2 extinguishers are often used, but this tender can supply a large quantity of CO2 via a hoseline similar to a ‘first-aid’ reel located on most fire appliances. In some situations, such as underground electrical substations, connections on buildings or access panels on the street exist where CO2 can be pumped through fixed piping similar to a booster system.

New CO2 Tender for 38 Pyrmont StationPhoto March 2013

New CO2 Tender for 38 Pyrmont StationPhoto March 2013