Service – NSW Fire & Rescue
Appliance type – Rescue Pumper
Fleet number – ME487
Cab Chassis – Isuzu
Body Builder – Skilled (SEM)
Registration – BC37RL
Served at 399 Narrabri
Built by Skilled Engineering (now SEM Fire & Rescue) in July 2002
Service – NSW Fire & Rescue
Appliance type – Rescue Pumper
Fleet number – ME487
Cab Chassis – Isuzu
Body Builder – Skilled (SEM)
Registration – BC37RL
Served at 399 Narrabri
Built by Skilled Engineering (now SEM Fire & Rescue) in July 2002
Service – Fire & Rescue Service of WA
Appliance type – Medium Pumper
Fleet number – MP60
Cab Chassis – International ACCO 2350
Body Builder – South West Fire Units
Registration – 1ALI099
This pumper was part of a build of 6 on ACCO 2350 cab chassis. Most were originally setup as a standard Medium Pumper and later modified to become a Medium Pumper Heavy Rescue for use at major regional stations. The addition of a bullbar and updated signage are key visual signs of the rebuild. This appliance appears to have the midlife rebuild complete without the upgrade to Heavy Rescue
By 2015, this appliance had been replaced at Karratha by a Scania
Photographed in 2013, thanks Matt
Service – Fire & Rescue Service of WA
Appliance type – Medium Pumper
Fleet number – MP61
Cab Chassis – International ACCO 2350
Body Builder – South West Fire Units
Registration – 1QAJ503
This pumper was part of a build of 6 on ACCO 2350 cab chassis. It was originally setup as a standard Medium Pumper and then after a midlife rebuild was modified to become a Medium Pumper Heavy Rescue for use at major regional stations. The addition of a bullbar and updated signage are key visual signs of the rebuild.
Photographed in 2004 at Daglish Fire Station – in MP configuration
Photographed at the training academy at Forrestfield in 2012
Service – Fire & Rescue Service of WA
Appliance Type – Medium Pumper / Heavy Rescue
Fleet number – MP68
Cab Chassis – Scania 94D 260
Body Builder – WA Fire Appliances
Registration – 1QAY-838
In service at Osborne Park since new
Service – Fire & Rescue Service of WA
Appliance Type – Medium Pumper
Fleet number – MP64
Cab Chassis – Scania 94D 260
Body Builder – WA Fire Appliances
Registration – 1BFK-934
Third build of the ‘Series IV’ Medium Pumper, in service at xx Fire Station since commissioning
Service – Fire & Rescue Service of WA
Appliance Type – Medium Pumper / Heavy Rescue
Fleet number – MPHR66
Cab Chassis – Scania 94D 260
Body Builder – WA Fire Appliances
Registration – 1AYK-696
Fifth build of the ‘Series IV’ Medium Pumper, in service at Daglish Fire Station since commissioning. This was first built as a Medium Pumper (MP66 fleet number), and later converted to carry Heavy Rescue equipment with the decentralised Heavy Rescue approach
Service – Fire & Rescue Service of WA
Appliance Type – Medium Pumper
Fleet number – MP62
Cab Chassis – Scania 94D 260
Body Builder – WA Fire Appliances
Registration – 1QAM-312
First build of the ‘Series IV’ Medium Pumper, in service at Claremont Fire Station since commissioning
Service – Fire & Rescue Service of WA
Appliance Type – Medium Pumper
Fleet number – MP69
Cab Chassis – Scania 94D 260
Body Builder – WA Fire Appliances
Registration – 1QAM-457
Used as the Metro area spare Medium Pumper. Was the first of these pumpers to feature the upgraded ‘fluoro yellow’ type striping.
Service – WA Fire Brigades (now known as Fire & Rescue Service of WA)
Appliance type – Medium Pumper
Fleet number – MP21
Cab Chassis – International ACCO 1810B
Body Builder –
Registration – 6DO171
Served at Karratha. When located in a yard in Malaga, the appliance looked very tired with a large amount of rust. BHP Billiton markings were visible, indicating the veihicle likely had a hard life at a mine site after retiring from WAFB/FRS service.
Service – Fire & Rescue Service of WA
Appliance type – Medium Pumper
Fleet number – MP75
Cab Chassis – Scania 94D 260
Body Builder –
Registration – 1BXF712
Served as the Metro region spare.
MORE PHOTOS including all-round locker shots