Category Archives: Appliances

WA Fire & Rescue – UP07 – Scania Urban Pumper

Service – Fire & Rescue Service of WA
Appliance type – Urban Pumper
Fleet number – UP07
Cab Chassis – Scania P310
Body Builder –
Registration – 1QBP394

This Urban Pumper replaced an Acco 2350 based Medium Pumper at Kalgoorlie-Boulder station.

DFES states: “UP Series appliance design is a continuous improvement upgrade to the Heavy Pump appliance series first commissioned in 2008.
The UP series development process incorporates the commissioning by Fleet and Equipment Services of FESA generated drawings and specifications, proto type manufacture under direction, and full scale manufacturing. This process was adapted in recognition of the variations experienced across the preceding MP and HP series where the contracted manufacturer directed the appliance build process. The process provides for standardisation across the series irrespective of manufacturers (provided capability has been demonstrated) and has resulted in reduced delivery timelines.”

Thanks to Matt for these photos.
IMG_4124


WA Fire & Rescue – MP(HR)61 – Acco 2350 Medium Pumper Heavy Rescue

Service – Fire & Rescue Service of WA
Appliance type – Medium Pumper
Fleet number – MP61
Cab Chassis – International ACCO 2350
Body Builder – South West Fire Units
Registration – 1QAJ503

This pumper was part of a build of 6 on ACCO 2350 cab chassis. It was originally setup as a standard Medium Pumper and then after a midlife rebuild was modified to become a Medium Pumper Heavy Rescue for use at major regional stations. The addition of a bullbar and updated signage are key visual signs of the rebuild.

Photographed in 2004 at Daglish Fire Station – in MP configuration

Photographed at the training academy at Forrestfield in 2012

IMG_4562


Appliances Heavy Tanker Isuzu Kuipers Engineering New South Wales NSW Rural Fire Service Tanker

NSW RFS – Narellan 1 (2011 build) Isuzu

Service: NSW Rural Fire Service
Appliance type: Tanker (Cat 1)
Fleet Number:
Cab Chassis: Isuzu
Body Builder: Kuipers Engineering
Build Date: Nov-2011
Registration: NA

Brigade: Narellan
District: Macarthur Zone
Region: East

New build by Kuipers Engineering on an Isuzu Cab Chassis. Seen below assisting at an out of area Hazard Reduction Burn

More photos of Narellan’s appliances in this gallery

Hazard Reduction burning conducted by the NSW Rural Fire Service in the Matthews St area of Davidson


ACT Fire Rescue Aerial Appliances Australian Capital Territory Bronto Ladders/Platforms Scania Varley

ACTFR – Ladder Platform 31 – Scania/Bronto

Service – ACT Fire Rescue
Appliance type – Aerial or Ladder Platform
Fleet number –
Cab Chassis – Scania P380
Body Builder – Bronto Skylift boom, with Varley bodywork
Build Date – January 2009
Registration – 212465

Completed in 2009, this Bronto Ladder Platform replaced an aging 30 metre Bronto LP on an International ACCO cab chassis.

Bronto supplied the F44RLX ERX hydraulic ladder platform on Scania Cab Chassis with Varley completing the fitout prior to delivery to ACT Fire & Rescue. This LP is very similar to the new Ladder Platform delivered to FRNSW City of Sydney station in 2010 ()

A full gallery of this vehicle HERE

ACT Fire Brigade's 44 metre Bronto F44RLX-ERX Ladder Platform, or Scania P380 Cab Chassis. Bodywork by Liquip of Queensland

ACT Fire Brigade's 44 metre Bronto F44RLX-ERX Ladder Platform, or Scania P380 Cab Chassis. Bodywork by Liquip of Queensland

ACT Fire Brigade's 44 metre Bronto F44RLX-ERX Ladder Platform, or Scania P380 Cab Chassis. Bodywork by Liquip of Queensland


Alexander Perrie Appliances Mitsubishi New South Wales NSW Rural Fire Service

NSW RFS – Davidson 7 (2008 build)

Service: NSW Rural Fire Service
Appliance type: Tanker (Cat 7)
Fleet Number: BFO 3473
Cab Chassis: Mitsubishi Canter
Body Builder: Alexander Perrie
Build Date: 2008
Registration: NA

Brigade: Davidson
District: Warringah/Pittwater
Region: East

Davidson’s 2008 build Category 7 tanker replaced a similar Mitsubishi build. Alexander Perrie completed the bodywork with a build plate of October 2008 on the Dual Cab Canter cab chassis. The tanker held approximately 1200 L of water with a diesel fuelled auxiliary firefighting pumpset.

This vehicle was replaced at Davidson Brigade by a 2012 build Isuzu Cat 7 Tanker. Current brigade unknown – do you have an update?

More photos of Davidson brigade including this tanker are here

NSWRFS Davidson 7 Tanker. Warringah Pittwater DistrictPhoto 2008


ACT Fire Rescue Appliances Australian Capital Territory Australian Fire Company Scania

ACTFR – Pumper 3 – Scania/AFC ’90s Build

Service – ACT Fire Rescue
Appliance type – Pumper
Fleet number –
Cab Chassis – Scania 93M 250
Body Builder – Australia Fire Co.
Registration – 207106

This Pumper was built by Australia Fire Co in SA in the early 1990s. It was replaced at Woden Valley Fire Station by a 2010 Varley Build Scania.

More photos of all around the vehicle in this album
http://photos.liveitseeit.com/FireGear/ACT-Fire-Service/ACTFR-Pumper-3/

Scania 93M Pumper at Philip Foire Station


Appliances Isuzu Kuipers Engineering New South Wales NSW Rural Fire Service

NSW RFS – Blackheath 1 (2000 build) Isuzu

Service: NSW Rural Fire Service
Appliance type: Tanker (Cat 1)
Fleet Number:
Cab Chassis: Isuzu Dual Cab
Body Builder: Kuipers Engineering
Build Date: June 2000
Registration: NA

Brigade: Blaxland
District: Blue Mountains
Region: East

Blackheath 1 is a Kuipers Engineering build from June 2000 built on an Isuzu FTS750 dual cab.

More photos of Blackheath Brigade are here
http://photos.liveitseeit.com/FireGear/NSWRFSBrigades/NSW-RFS-Blackheath-Brigade-Blu/


Alexander Perrie Appliances Isuzu New South Wales NSW Rural Fire Service

NSW RFS – Hoxton Park 1 (2008 build)

Service: NSW Rural Fire Service
Appliance type: Tanker (Cat 1)
Fleet Number:
Cab Chassis: Isuzu
Body Builder: Alexander Perrie
Build Date: February 2008
Registration: NA

Brigade: Hoxton Park
District: Macarthur Zone
Region: East

Hoxton Park 1 is a 2008 build by Alexander Perrie on an Isuzu Dual Cab chassis. Pictured below in 2014 assisting in Warringah with Hazard Reduction work.

Hazard Reduction burning conducted by the NSW Rural Fire Service in the Matthews St area of Davidson


Appliances Isuzu Kuipers Engineering New South Wales NSW Rural Fire Service

NSW RFS – Catherine Field 1 (2014 build)

Service: NSW Rural Fire Service
Appliance type: Tanker (Cat 1)
Fleet Number:
Cab Chassis: Isuzu
Body Builder: Kuipers Engineering
Build Date: May 2014
Registration: NA

Brigade: Catherine Field
District: Macarthur Zone
Region: East

This Category 1 tanker was delivered new to Catherine Field brigade in Macarthur zone after body build by Kuipers Engineering in 2014

Hazard Reduction burning conducted by the NSW Rural Fire Service in the Matthews St area of Davidson


Appliances Land Rover New South Wales NSW Rural Fire Service Yamba Engineering

NSW RFS – Wamberal 9 – Land Rover Dual Cab

Service: NSW Rural Fire Service
Appliance type: Striker/Light Tanker (Cat 9)
Fleet Number:
Cab Chassis: Land Rover Dual Cab
Body Builder: Yamba Engineering
Build Date:
Registration: NA

Brigade: Wamberal
District: Gosford
Region: East

Yamba Engineering bodywork on this Land Rover dual cab serving at Wamberal Brigade in Gosford District.

Do you have more information on this appliance? Build dates, brigades served at and more help us with recording history. Comment on the website or facebook page.

Wamberal Brigade's Cat 9 on a Land Rover vehicle, from Gosford District

Wamberal Brigade's Cat 9 on a Land Rover vehicle, from Gosford District

Wamberal Brigade's Cat 9 on a Land Rover vehicle, from Gosford District