Service: NSW Rural Fire Service
Appliance type: Tanker (Cat 7)
Fleet Number:
Cab Chassis: Isuzu
Body Builder: Alexander Perrie
Build Date: July 2011
Registration: NA
Brigade: Bullawa-Eulah
District: Narrabri RFD, Namoi/Gwydir Zone
Region: North
Service: NSW Rural Fire Service
Appliance type: Tanker (Cat 1)
Fleet Number:
Cab Chassis: Isuzu
Body Builder:Alexander Perrie
Build Date: 2010
Registration: NA
Brigade: Carrington Falls
District: Illawarra Zone
Region: East
This Category 1 Tanker was built by Alexander Perrie in Sydney during 2010 for Carrington Falls Brigade in the Illawarra Zone.
It’s built on an Isuzu FTS 800 Dual Cab to NSW Rural Fire Service Specifications
Service: NSW Rural Fire Service
Appliance type: Tanker (Cat 7)
Fleet Number: BFO 3473
Cab Chassis: Mitsubishi Canter
Body Builder: Alexander Perrie
Build Date: 2008
Registration: NA
Brigade: Davidson
District: Warringah/Pittwater
Region: East
Davidson’s 2008 build Category 7 tanker replaced a similar Mitsubishi build. Alexander Perrie completed the bodywork with a build plate of October 2008 on the Dual Cab Canter cab chassis. The tanker held approximately 1200 L of water with a diesel fuelled auxiliary firefighting pumpset.
This vehicle was replaced at Davidson Brigade by a 2012 build Isuzu Cat 7 Tanker. Current brigade unknown – do you have an update?
More photos of Davidson brigade including this tanker are here
Service: NSW Rural Fire Service
Appliance type: Tanker (Cat 1)
Fleet Number:
Cab Chassis: Isuzu
Body Builder: Alexander Perrie
Build Date: February 2008
Registration: NA
Brigade: Hoxton Park
District: Macarthur Zone
Region: East
Hoxton Park 1 is a 2008 build by Alexander Perrie on an Isuzu Dual Cab chassis. Pictured below in 2014 assisting in Warringah with Hazard Reduction work.
Service – ACT Rural Fire Service
Appliance type – Tanker (medium)
Fleet number –
Cab Chassis – Isuzu NPS 300
Body Builder – Alexander Perrie
Build Date – June 2009
Registration – 213878
Gungahlin 30 is a medium tanker based on the NSW RFS Cat 7 design. It is part of a build by Alexadner Perrie built in 2009 on the Isuzu NP 300 cab chassis
All round photos of this tanker can be viewed in this gallery
Service: NSW Rural Fire Service
Appliance type: Tanker (Cat 1)
Fleet Number:
Cab Chassis: Isuzu
Body Builder: Alexander Perrie
Build Date: December 1998
Registration: NA
Brigade: Jerrabomberra Creek
District: Lake George Zone – Queanbeyan District
Region: East
More photos of Jerrabomberra Creek Brigade
Service: NSW Rural Fire Service
Appliance type: Tanker (Cat 7)
Fleet Number:
Cab Chassis: Isuzu NPS 300
Body Builder: Alexander Perrie
Build Date: August 2012
Registration: NA
Brigade: Jerrabomberra Creek
District: Lake George Zone – Queanbeyan District
Region: East
Jerrabomberra Creek 7 is a 2012 build by Alexander Perrie on an Isuzu NPS 300 Dual Cab.
More photos of Jerrabomberra Creek Brigade
Appliance type: Tanker (Cat 1)
Fleet Number: BFO1482
Cab Chassis: Isuzu FTS 800
Body Builder: Alexander Perrie
Build Date: April 2014
Registration: NA
Brigade: Loftus
District: Sutherland
Region: East
Loftus Brigade took delivery of their new Isuzu FTS 800 based Alexander Perrie built Cat 1 tanker in mid-2014. This replaced a previous Dual Cab Isuzu which served the brigade for around a decade as their ‘Bravo’ Tanker.
Photos of Loftus Brigade’s station, Freightliner Cat 1 and previous Isuzu 1B can be found in this gallery
Service – NSW Fire & Rescue
Appliance type – Aerial Pumper
Fleet number – ME704
Cab Chassis – Scania P340
Body Builder – Alexander Perrie (Telesqurt boom)
Registration – BQ89CT
This aerial pumper is one of a new build by Alexander Perrie Sydney built in 2012. The aerial is an american built Telesqurt boom with AP completing the bodywork. Delivered new to 47 Revesby, replacing an older Mills Tui built Aerial Pumper.
Service – NSW Fire & Rescue
Appliance Type – Ladder Platform
Fleet number – ME 208
Cab Chassis – Scania
Body Builder – Alexander Perrie / Bronto Skylift F27HDT
Registration – FBY208
In service at Crows Nest – LP36
RSS - Posts
Home