Service – ACT Fire Rescue
Appliance type – Pumper
Fleet number –
Cab Chassis – Scania 93M 250
Body Builder – Australia Fire Co.
Registration – 207106
This Pumper was built by Australia Fire Co in SA in the early 1990s. It was replaced at Woden Valley Fire Station by a 2010 Varley Build Scania.
More photos of all around the vehicle in this album
http://photos.liveitseeit.com/FireGear/ACT-Fire-Service/ACTFR-Pumper-3/
Service – NSW Fire & Rescue
Appliance type – Pumper
Fleet number – ME340
Cab Chassis – Scania 94D 310
Body Builder – Australian Fire Co
Registration – FBY340
Served at 19 Silverwater
Service – MFB Melbourne
Appliance Type – Ultra Large Pumper
Fleet Number – Car 391
Cab Chassis – Scania P113M 310
Body Builder – Australian Fire Co.
Registration – MAE491
Commissioned – 1995
This is one of only a few ULPs in the MFB. It has served at 42 Newport and 1 Eastern Hill Fire Stations.
Service – NSW Fire & Rescue
Appliance type – Pumper
Fleet number – ME345
Cab Chassis – Scania 94D 310
Body Builder –
Registration – FBY345
Served at Manly as P24
Service – Fire & Rescue Service of WA
Appliance type – Combination Ladder Platform
Fleet number – CLP1
Cab Chassis – Scania P113H-360
Body Builder – Australian Fire Co / Bronto Skylift
Registration – 8OZ812
Served at Perth Fire Station. Replaced in 2013 by CLP 3
Bronto Skylift 33-2TI model, 33m Ladder Platform
Service – NSW Fire & Rescue
Appliance type – Pumper
Fleet number – ME341
Cab Chassis – Scania 94D 310
Body Builder – Australian Fire Company
Registration – FBY341
Served at Dee Why as P69, then reassigned to 76 Bondi after a refurbishment including the newer signage and striping.
Service – NSW Fire & Rescue
Appliance type – Pumper
Fleet number – ME337
Cab Chassis – Scania 94D 310
Body Builder – Australian Fire Company
Registration – FBY337
Served at Glebe as Pumper 18. After being replaced by a new Scania Pumper, this appliance was retro-fitted with a CAFS (Compressed air foam system) utillity and trialled at a number of stations including 64 Lakemba and 46 Sutherland.
At last check it was assigned to 31 Busby
Service – NSW Fire & Rescue
Appliance type – Pumper
Fleet number – ME246
Cab Chassis – Scania 94D 310
Body Builder – Australian Fire Company
Registration – BC70LE
Served at St Andrews as P92
Service -NSW Fire & Rescue
Appliance Type – Pumper
Fleet number – ME 347
Cab Chassis – Scania 94D 310
Body Builder –
Registration – FBY347
Served at Botany
Service – Fire & Rescue Service of WA
Appliance type – Heavy Pumper
Fleet number – HP10
Cab Chassis – Scania P93M 250
Body Builder – Australian Fire Company
Registration – 8HW829
Served as a spare appliance. Now retired from service. After initially being decommissioned this pumper was retrofitted with additional Hazmat capabilities to be used at a large scale security operation in Perth. It has now been sold and is part of a private collection.
RSS - Posts
Home